 |
Quick and easy to operate, the type 9600 provides an instant readout of turns and performance is not affected by a normal workshop environment. In operation calibration is made against a standard coil. |
|
|
 |
The platform types 9601 and 9602 cover the most commonly found sizes of wound bobbins or self supporting coils. Simple to use, the bobbin is placed over the probe and the termination leads, connected to the platform. The number of turns on the bobbin is then instantly displayed on the 9600 readout unit. |
|
|
 |
The platform type 9603 is most suited to the smaller sizes of bobbins and coils and is available with a choice of probe size. The standard 'flat' probe has a cross-section of 1.5 x 6.0mm. The alternative 'square' probe has a cross-section of 2.5 x 2.5mm.
|
|
|
 |
The platform types 9604 and 9605 are designed for the measurement of Iarger wound bobbins and self supporting coils. In operation the probe must be lifted to allow the test sample to be positioned in the measurement area. After making electrical connection to the coil Ieadouts the number of turns can then be read from the 9600 readout unit. |
|
|
 |
The platforms types 9606 and 9607 are specially designed to measure toroidal wound coils. The 9606 is suitable for small cores and the type 9607 is suitable for the larger varieties.
|
| |
|
